Technical Drawing
Technical Specifications
| Bore (d) | 30 mm |
| Outer Diameter (D) | 55 mm |
| Width (B) | 9 mm |
| Dynamic Load (C) | 11.25 kN |
| Static Load (C₀) | 8.8 kN |
| Limiting Speed (Grease) | 13,000 rpm |
| Limiting Speed (Oil) | 15,000 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- Open bearing, with no integral seal or shield on either side.
- What it shields
- The bearing has no integral barrier against dust or water, or to retain grease. Protection and lubricant retention depend on the surrounding assembly.
- Effect on speed
- The open version provides the baseline grease-lubricated limiting speed for this base model. Use the speed listed in the specification table when selecting the bearing.
- Lubrication
- The factory table lists both grease and oil lubrication, with separate limiting speeds. Use the rating for the intended lubrication method.
- When to choose it
- Consider this version when the housing provides contamination control and the assembly supplies and retains the required lubricant.
Key Features
- Standard dimensions: 30mm bore × 55mm OD × 9mm width
- Open type for contamination protection
- Dynamic load rating: 11.25kN | Static load rating: 8.8kN
- Grease speed limit: 13,000 r/min | Oil speed limit: 15,000 r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 16000 series bearings you may need