6002RS
6000 SeriesRSGDQV 6002RS deep groove ball bearing, 15×32×9mm, single rubber seal (contact type), good dust and moisture resistance. Rated dynamic load 5.6kN, rated static load 2.85kN. Typical applications: Home Appliances, Power Tools, 3D Printing & Robotics.
Technical Drawing
Technical Specifications
| Bore (d) | 15 mm |
| Outer Diameter (D) | 32 mm |
| Width (B) | 9 mm |
| Dynamic Load (C) | 5.6 kN |
| Static Load (C₀) | 2.85 kN |
| Limiting Speed (Grease) | 15,000 rpm |
| Limiting Speed (Oil) | 28,000 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Related specifications notes
Seal Design Notes
- Seal construction
- An RS sealing ring made of nitrile rubber (NBR) on one side; the opposite side is open.
- What it shields
- The ring helps limit contaminant entry and grease escape on the sealed side. The open side remains dependent on the assembly. No water-resistance rating is specified.
- Effect on speed
- Where provided, the RS grease-lubricated limiting speed is lower than the open version for the same base model. Compare the two model-specific ratings; if the RS rating is missing, request confirmation before selecting an operating speed.
- Lubrication
- The factory table lists both grease and oil lubrication. Use the oil-specific rating for an oil-lubricated arrangement; a missing grease rating does not remove the listed oil rating.
- When to choose it
- Consider RS when a one-sided NBR sealing arrangement suits the assembly and the applicable listed speed covers the intended operating conditions. Confirm the required contamination protection.
Key Features
- Standard dimensions: 15mm bore × 32mm OD × 9mm width
- Single rubber seal for contamination protection
- Dynamic load rating: 5.6kN | Static load rating: 2.85kN
- Grease speed limit: 15,000 r/min | Oil speed limit: 28,000 r/min
- Material: GCr15 | Internal clearance: C0 | Precision grade: P0
Need a quote for this bearing?
Get pricing, lead time, and shipping options — submit your inquiry today
Related Products
Other 6000 series bearings you may need
60×95×18mm
View Details
d × D × B60×95×18 mm
Dynamic Load (C)30.8 kN
Limiting Speed (Grease)4,000 r/min
60002RS
60×95×18mm
View Details
d × D × B60×95×18 mm
Dynamic Load (C)30.8 kN
Limiting Speed (Grease)7,100 r/min
6000ZZ
60×95×18mm
View Details
d × D × B60×95×18 mm
Dynamic Load (C)30.8 kN
Limiting Speed (Grease)4,000 r/min
6000RS
60×95×18mm
View Details
d × D × B60×95×18 mm
Dynamic Load (C)30.8 kN
Limiting Speed (Grease)7,100 r/min
6000RZ