6202open
6200 SeriesOpenGDQV 6202open deep groove ball bearing, 15×35×11mm, open type (no seal or shield), for special applications requiring frequent maintenance. Rated dynamic load 7.65kN, rated static load 3.75kN. Typical applications: Electric Motors, Home Appliances, Power Tools, Automotive, Water Pumps.
Technical Drawing
Technical Specifications
| Bore (d) | 15 mm |
| Outer Diameter (D) | 35 mm |
| Width (B) | 11 mm |
| Dynamic Load (C) | 7.65 kN |
| Static Load (C₀) | 3.75 kN |
| Limiting Speed (Grease) | 20,000 rpm |
| Limiting Speed (Oil) | 24,000 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- Open bearing, with no integral seal or shield on either side.
- What it shields
- The bearing has no integral barrier against dust or water, or to retain grease. Protection and lubricant retention depend on the surrounding assembly.
- Effect on speed
- The open version provides the baseline grease-lubricated limiting speed for this base model. Use the speed listed in the specification table when selecting the bearing.
- Lubrication
- The factory table lists both grease and oil lubrication, with separate limiting speeds. Use the rating for the intended lubrication method.
- When to choose it
- Consider this version when the housing provides contamination control and the assembly supplies and retains the required lubricant.
Key Features
- Standard dimensions: 15mm bore × 35mm OD × 11mm width
- Open type for contamination protection
- Dynamic load rating: 7.65kN | Static load rating: 3.75kN
- Grease speed limit: 20,000 r/min | Oil speed limit: 24,000 r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 6200 series bearings you may need