6207ZZ
6200 SeriesZZGDQV 6207ZZ deep groove ball bearing, 35×72×17mm, double-sided metal shield (non-contact type), low friction, suitable for high-speed applications. Rated dynamic load 25.6kN, rated static load 15.2kN. Typical applications: Electric Motors, Home Appliances, Power Tools, Automotive, Water Pumps.
Technical Drawing
Technical Specifications
| Bore (d) | 35 mm |
| Outer Diameter (D) | 72 mm |
| Width (B) | 17 mm |
| Dynamic Load (C) | 25.6 kN |
| Static Load (C₀) | 15.2 kN |
| Limiting Speed (Grease) | 9,500 rpm |
| Limiting Speed (Oil) | Please contact sales for confirmationPending confirmation |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- Metal shields on both sides. No rubber sealing-ring material is specified.
- What it shields
- The shields help limit dust entry and grease escape on both sides. They should not be treated as a specified water barrier.
- Effect on speed
- The listed grease-lubricated limiting speed is 100% of the open version for the same base model. Select against the actual speed in the specification table.
- Lubrication
- The factory table specifies grease lubrication and provides no oil-lubricated limiting speed. Confirm suitability with GDQV before specifying an oil-lubricated arrangement.
- When to choose it
- Consider ZZ for a grease-lubricated assembly needing shields on both sides. Confirm grease life and maintenance requirements for the operating conditions.
Key Features
- Standard dimensions: 35mm bore × 72mm OD × 17mm width
- Double metal shield for contamination protection
- Dynamic load rating: 25.6kN | Static load rating: 15.2kN
- Grease speed limit: 9,500 r/min | Oil speed limit: - r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 6200 series bearings you may need