6209open
6200 SeriesOpenGDQV 6209open deep groove ball bearing, 45×85×19mm, open type (no seal or shield), for special applications requiring frequent maintenance. Rated dynamic load 31.65kN, rated static load 20.7kN. Typical applications: Electric Motors, Home Appliances, Power Tools, Automotive, Water Pumps.
Technical Drawing
Technical Specifications
| Bore (d) | 45 mm |
| Outer Diameter (D) | 85 mm |
| Width (B) | 19 mm |
| Dynamic Load (C) | 31.65 kN |
| Static Load (C₀) | 20.7 kN |
| Limiting Speed (Grease) | 7,500 rpm |
| Limiting Speed (Oil) | 9,000 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- Open bearing, with no integral seal or shield on either side.
- What it shields
- The bearing has no integral barrier against dust or water, or to retain grease. Protection and lubricant retention depend on the surrounding assembly.
- Effect on speed
- The open version provides the baseline grease-lubricated limiting speed for this base model. Use the speed listed in the specification table when selecting the bearing.
- Lubrication
- The factory table lists both grease and oil lubrication, with separate limiting speeds. Use the rating for the intended lubrication method.
- When to choose it
- Consider this version when the housing provides contamination control and the assembly supplies and retains the required lubricant.
Key Features
- Standard dimensions: 45mm bore × 85mm OD × 19mm width
- Open type for contamination protection
- Dynamic load rating: 31.65kN | Static load rating: 20.7kN
- Grease speed limit: 7,500 r/min | Oil speed limit: 9,000 r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 6200 series bearings you may need