Technical Drawing
Technical Specifications
| Bore (d) | 12 mm |
| Outer Diameter (D) | 37 mm |
| Width (B) | 12 mm |
| Dynamic Load (C) | 9.8 kN |
| Static Load (C₀) | 4.2 kN |
| Limiting Speed (Grease) | 16,000 rpm |
| Limiting Speed (Oil) | 24,000 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- An RS sealing ring made of nitrile rubber (NBR) on one side; the opposite side is open.
- What it shields
- The ring helps limit contaminant entry and grease escape on the sealed side. The open side remains dependent on the assembly. No water-resistance rating is specified.
- Effect on speed
- Where provided, the RS grease-lubricated limiting speed is lower than the open version for the same base model. Compare the two model-specific ratings; if the RS rating is missing, request confirmation before selecting an operating speed.
- Lubrication
- The factory table lists both grease and oil lubrication. Use the oil-specific rating for an oil-lubricated arrangement; a missing grease rating does not remove the listed oil rating.
- When to choose it
- Consider RS when a one-sided NBR sealing arrangement suits the assembly and the applicable listed speed covers the intended operating conditions. Confirm the required contamination protection.
Key Features
- Standard dimensions: 12mm bore × 37mm OD × 12mm width
- Single rubber seal for contamination protection
- Dynamic load rating: 9.8kN | Static load rating: 4.2kN
- Grease speed limit: 16,000 r/min | Oil speed limit: 24,000 r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 6300 series bearings you may need