Technical Drawing
Technical Specifications
| Bore (d) | 20 mm |
| Outer Diameter (D) | 52 mm |
| Width (B) | 15 mm |
| Dynamic Load (C) | 16 kN |
| Static Load (C₀) | 7.9 kN |
| Limiting Speed (Grease) | 14,000 rpm |
| Limiting Speed (Oil) | 17,000 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- A metal shield on one side; the opposite side is open. No rubber sealing-ring material is specified.
- What it shields
- The shield helps limit dust entry and grease escape on the shielded side. The open side needs protection from the assembly; no water-resistance rating is provided.
- Effect on speed
- The listed grease-lubricated limiting speed is 100% of the open version for the same base model. Equal listed limits do not establish identical friction or running temperature.
- Lubrication
- The factory table lists both grease and oil lubrication. Check the model-specific oil speed and arrange lubricant access through the open side.
- When to choose it
- Consider Z when one side needs a shield and the open side faces a protected, lubricated space in the assembly.
Key Features
- Standard dimensions: 20mm bore × 52mm OD × 15mm width
- Single metal shield for contamination protection
- Dynamic load rating: 16kN | Static load rating: 7.9kN
- Grease speed limit: 14,000 r/min | Oil speed limit: 17,000 r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 6300 series bearings you may need