Technical Drawing
Technical Specifications
| Bore (d) | 50 mm |
| Outer Diameter (D) | 110 mm |
| Width (B) | 27 mm |
| Dynamic Load (C) | 62.05 kN |
| Static Load (C₀) | 38.3 kN |
| Limiting Speed (Grease) | 6,000 rpm |
| Limiting Speed (Oil) | 7,500 rpm |
| Internal Clearance | C0 |
| Material | GCr15 |
| Precision Grade | P0 |
Seal Design Notes
- Seal construction
- Open bearing, with no integral seal or shield on either side.
- What it shields
- The bearing has no integral barrier against dust or water, or to retain grease. Protection and lubricant retention depend on the surrounding assembly.
- Effect on speed
- The open version provides the baseline grease-lubricated limiting speed for this base model. Use the speed listed in the specification table when selecting the bearing.
- Lubrication
- The factory table lists both grease and oil lubrication, with separate limiting speeds. Use the rating for the intended lubrication method.
- When to choose it
- Consider this version when the housing provides contamination control and the assembly supplies and retains the required lubricant.
Key Features
- Standard dimensions: 50mm bore × 110mm OD × 27mm width
- Open type for contamination protection
- Dynamic load rating: 62.05kN | Static load rating: 38.3kN
- Grease speed limit: 6,000 r/min | Oil speed limit: 7,500 r/min
- Bearing steel, internal clearance and precision grade pending
Related Products
Other 6300 series bearings you may need